Welded Tip Fast Response Thermocouple Sensor (PTFE Single-Shot)

Description

A fast responsive, high temperature PTFE insulated thermocouple, commonly used in aerospace, composite, laboratory, autoclave and steriliser applications where under pressure the cable must be gas, steam or water-tight. The cable has a round construction.

One pair of solid 1/0.376mm diameter conductors. The wire is laid flat then PTFE extruded in a Single-Shot construction (round). The Single-Shot construction provides a gas, steam and water-tight insulation.

This product can be supplied with a calibration certificate.

Features

Temperature rated -75°C to +250°C
Round construction
Available in Thermocouple Extension Grades KX, JX, TX, NX
Cable lengths to suit your application (standard lengths 1m, 2m, 5m)
Can be supplied with bare tails, a fitted miniature plug or a fitted standard plug
Colour coded to IEC 60584.3 (BS EN 60584.3)
Flexible construction, PTFE insulation is resistant to most known chemicals, fluids and oils

Bespoke Options

This product can be custom-made and/or configured to your requirements using the options below. Each option has a code that is used to construct a final order code. An example order code is included.

Item	Options	Code
Sensor Type	Welded Tip Fast Response Thermocouple Sensor (PTFE Single-Shot)	TW
Conductor/Thermocouple Type	Type K	K
	Type J	J
	Type T	T
	Type N	N
Cable Insulation	PTFE Single-Shot (+250°C)
Conductor Diameter	0.376mm
Cable Termination Options	Bare Tails	A4T
	Miniature Thermocouple Plug	A4M
	Standard Thermocouple Plug	A4S
Cable Length (mm)	As required to suit your application (standard lengths 1000, 2000, 5000)	e.g. 2000