Thermowell Assemblies with Integrated Compression Fitting (to suit 3.0mm dia. tubes)

Product Code: WTC3

The WTC3 threaded thermowells have an integrated compression fitting that includes a single compression olive to suit 3.0mm diameter tubes. They are fabricated from 316 Stainless Steel material and are supplied with a male process thread (complete with hexagon) which screws into the process.

The stem has an outside diameter of 6mm and a 4mm inside diameter.

Available with 1/2 inch BSPT and 1/4 inch BSPT male process thread options.

The pockets are stocked in standard lengths up to 150mm so can normally be supplied ex-stock if required urgently.

Note: Minimum sensor length = stem length (U) + 50mm. E.g. 50mm length thermowell is for a 100mm sensor.

  • Features
  • Technical
  • Options
    • 316 stainless steel standard material
    • 6.0mm stem diameter (4.0mm diameter ID)
    • 1/2 inch BSPT and 1/4 BSPT male process thread options
    • Integral compression fitting suits 3.0mm dia. tube
    • Available ex-stock
    • Replacement olives and nuts available
  • 1/2 inch BSP Tapered Male Process Thread
    Standard Material 316 Stainless Steel
    Stem Diameter 6.0mm (4.0mm ID)
    Integral Compression Fitting To suit 3.0mm diameter tube
    Thread Length 19mm
    Body (A/F) 22mm
    Nut (A/F) 14mm
    Standard Lengths (U) 50mm, 100mm, 150mm

     

    1/4 inch BSP Tapered Male Process Thread
    Standard Material 316 Stainless Steel
    Stem Diameter 6.0mm (4.0mm ID)
    Integral Compression Fitting To suit 3.0mm diameter tube
    Thread Length 14mm
    Body (A/F) 14mm
    Nut (A/F) 11mm
    Standard Lengths (U) 50mm, 100mm, 150mm
  • Male Process Thread Stem Length Order Code
    1/2 inch BSPT 50mm WTC3E-6.0-4.0-050
    100mm WTC3E-6.0-4.0-100
    150mm WTC3E-6.0-4.0-150
    1/4 inch BSPT 50mm WTC3C-6.0-4.0-050
    100mm WTC3C-6.0-4.0-100
    150mm WTC3C-6.0-4.0-150
    Minimum sensor length = stem length (U) + 50mm
    E.g. WTC3E-6.0-4.0-050 (50mm) is for a 100mm sensor
  • No software available