Fabricated RTD (Pt100/Pt1000) Sensor with Standard Head

Product Code: PSH

Platinum Resistance Thermometers, available with a 4.5mm, 6.0mm or 8.0mm diameter 316 stainless steel probe.

The PSH sensor is terminated with an IP67 rated standard (heavy duty) die cast alloy terminal head which has a 20mm x 1.5mm (M20) cable entry. Inside the head is a ceramic terminal block which makes the connections to the extension cables very easy.

Available as Simplex or Duplex in 2, 3 or 4-wire configurations. A 4~20mA transmitter can be mounted in the terminal head if required. Supplied as standard with a brass compression fitting attached to the terminal head (stainless steel options available on request).

The PSH sensor is supplied with a rigid 316 Stainless Steel sheath. Where the design allows, the sensors are powder-filled to protect the element from damage caused by vibration.

Suitable for use between -75°C and +250°C.

This product can be supplied with a calibration certificate. Contact sales for further information. This product can be supplied with a calibration certificate. Contact sales for further information.
  • Features
  • Technical
  • Documents
  • Software
    • Pt100 or Pt1000 as standard (other elements available)
    • 4.5mm, 6.0mm or 8.0mm Ø 316 stainless steel probe
    • 2, 3 or 4-wire configuration
    • Terminated with IP67 rated standard die cast alloy head (M20 cable entry)
    • Suitable for use between -75°C and +250°C
    • Ex-stock options available
  • Technical Details
    Sensor Type PSH: Fabricated RTD Pt100 Sensor with Standard Terminal Head
    PSHK: Fabricated RTD Pt1000 Sensor with Standard Terminal Head
    Probe Diameter (D1) 4.5mm, 6.0mm, 8.0mm (316 Stainless Steel)
    Detector Elements Simplex (1 channel)
    Duplex (2 channels)
    Probe Length (mm) (L1) As required to suit your application
    Wiring Configuration 2-wire
    4-wire (Simplex only)
    Grade of Element B (Accuracy: ±0.30°C at 0°C, ±0.80°C at 100°C)
    A (Accuracy: ±0.15°C at 0°C, ±0.35°C at 100°C)
    1/3 (Accuracy: ±0.08°C at 0°C, ±0.19°C at 100°C)
    1/5 (Accuracy: ±0.05°C at 0°C, ±0.15°C at 100°C)
    1/10 (Accuracy: ±0.03°C at 0°C, ±0.12°C at 100°C)
    Optional 316 Stainless Steel Compression Fittings To suit probe Ø: 4.5mm, 6.0mm, 8.0mm
    Optional Head Mounting 4~20mA Transmitter

    Linearised, head mounting 4~20mA transmitter, 24VDC power supply, non-isolated

    Replaces ceramic terminal block (pre-ranged)

    ATEX versions also available (contact sales)

  • No software available