In-House Calibration / Testing Services

In-House Calibration / Testing Services

Product Code: CAL

In addition to the in-house production of temperature sensors we offer a full range of Calibration and Testing Services.

Our In-house laboratory was initially introduced to test and verify the accuracy of the temperature sensors we manufacture. Due to high demand for our calibration services, our lab has been extensively expanded over the last 24 months to include the scope of pressure and humidity instrumentation. We have an ongoing improvement schedule for the laboratory and are aiming to have our laboratory process UKAS accredited.

We offer an extensive range of very cost-effective calibration/testing services, normally with a quick 1-2 day turnaround.

Each product tested is provided with a unique serial number that is crossreferenced to the calibration report containing the test results.

Our Scope of Services
Temperature Temperature -70°C / +1150°C
Infrared Temperature (Black Body) +50°C / +500°C
Temperature Simulation (Thermocouple, RTD & Resistance)
Pressure -0.8 to 15 bar (psi, bar, kPa, atm, mbar, kg/cm², mmHg, inHg, inH20)
15 to 700 bar (psi, bar, kPa, MPa, atm, mbar, kg/cm², mmHg, inHg, inH20)
Voltage Signal Voltage Simulation and Measurement: 0-10mV, 0-20mV, 0-1V, 0-5V, 0-10V
Currrent Current Simulation and Measurement: 0-20mA, 4-20mA
Humidity Fixed point Salt Saturation Chambers, 33% and 75%
Environmental Chamber 10% to 98% RH
  • Features
  • Technical
  • Documents
  • Software
  • Sensors and Instruments

    • Resistance Thermometers (Pt100, Pt1000, Pt130)
    • Thermocouples (Types K, J, T, N, E, R, S & B)
    • Hand Held Temperature Indicators (with or without sensor connected)
    • Temperature Transmitters (4~20mA, 0~10V etc.)
    • Pressure Gauges
    • Pressure Transmitters & Transducers (4~20mA, 0~10V etc.)
    • Infrared Thermometers
    • Temperature & Humidity Transmitters (4~20mA)
    • Bi-Metal Analogue Dial Thermometers
    • Temperature Controllers
    • Humidity Sensors
    • Data Loggers  

    Traceability

    All of our test equipment is certified by independent UKAS (or national equivalent) accredited laboratories. Certificates are available on request.

    UKAS Certification

    If you require a full UKAS certificate for your equipment please contact us to discuss. We work very closely with a number of UKAS accredited laboratories and can offer favourable rates and usually quick turnaround times. We are working towards out in-house laboratory achieving UKAS accreditation.

  • No technical data available


Contact us now to discuss your calibration requirements.